序号

标准名称

英文名称

公布年份

QT-1

工业管道.涂PTFE-FEP-PFA碳氟化树脂的管道构件

(Industrial pipes. Pipe components with PTFE - FEP - PFA fluorocarbon resin.)

1987

QT-2

软绝缘套管.第3部分:套管个别类型的规范.第228页:收缩率2:1,防火,抗液流,可热收缩半刚性聚乙二烯氟化物套管

(Flexible insulating sleeving. Part 3 : specifications for individual types of sleeving. Sheet 228 : heat-shrinkable semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1.)

1998

QT-3

软绝缘套管.第3部分:套管个别类型的规范.第233页:收缩率2:1,防火,抗液流,可热收缩氟橡胶套管

(Flexible insulating sleeving. Part 3 : specifications for individual types of sleeving. Sheet 233 : heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1.)

1998

QT-4

柔软绝缘套管.第3部分:套管独立型规范.第136节:挤压氟硅酮套管.一般用途

(Flexible insulating sleeving. Part 3 : specification for individual types of sleeving. Sheet 136 : extruded fluorosilicone sleeving. General purpose.)

1998

QT-5

航空航天系列.硅氟橡胶.61类.特性

(Aerospace series. Fluorosilicone rubbers. Class 61. Characteristics.)

1996

QT-6

弹性塑料.碳氟.６４类.性能

(Aerospace industry. Fluorocarbon rubbers. Class 64. Charateristics.)

1987

QT-7

弹性塑料.碳氟.６０类.性能

(Fluoro carbon rubbers. Class 60. Characteristics.)

1985

QT-8

弹性塑料.硅氟.６３类.性能

(AEROSPACE INDUSTRY. FLUORO SILICONE RUBBERS. CLASS 63. CHARACTERISTICS.)

1988

QT-9

军用高能材料.物理-化学分析及特性.八氟橡胶中氟橡胶的测定.萃取法

(ENERGETIC MATERIALS FOR DEFENSE. PHYSICO-CHEMICAL ANALYSIS AND PROPERTIES. DETERMINATION OF VITON IN OCTOVITON. METHOD BY EXTRACTION.)

1996

QT-10

塑料.含氟聚合物的分散、模塑和挤制材料.第2部分:试样制备和性能测定

(PLASTICS. FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 12086-2).)

1999

QT-11

塑料.含氟聚合物的分散、模塑和挤制材料.第1部分:名称与符号系统及基本规范

(PLASTICS. FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS. PART 1 : DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS. (EUROPEAN STANDARD EN ISO 12086-1).)

1999

QT-12

航空航天系列.氟碳橡胶.65类.特性

(AEROSPACE SERIES. FLUOROCARBON RUBBERS. CLASS 65. CHARACTERISTICS.)

1996

QT-13

弹性塑料.卤氟.６２类.性能

(AEROSPACE INDUSTRY. HALOGENO CARBON RUBBERS. CLASS 62. CHARACTERISTICS.)

1988

QT-14

绝缘软管.第3部分:各种类型绝缘软管规范.第343至345篇:未涂覆的扩展编织的乙稀-三氟氯乙稀软管

(Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheets 343 to 345 : expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated.)

2003

QT-15

航空航天系列.O型环.碳氟化合物橡胶(FKM),低压缩装置.硬度80

(Aerospace series. O-rings, in fluorocarbon rubber (FKM), low compression set. Hardness 80 IRHD.)

1998

QT-16

航空航天系列.O型环.碳氟化合物橡胶(FKM),低压缩装置.技术规范

(Aerospace series. O-rings, in fluorocarbon rubber (FKM), low compression set. Technical specification.)

1998

QT-17

电气用塑料薄膜规格 第3部分：专用材料的规格　活页7：对电气绝缘用氟乙烯-丙烯薄膜的要求

Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation (IEC 60674-3-7:1992)

1998

QT-18

绝缘软套管规范　第3部分：套管单型要求规范　活页136：可挤压碳氟化合物套管　一般用途

Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose (IEC 60684-3-136:1997)

1998

QT-19

绝缘软管　第3部分　各种型号套管的规范要求　活页２３３：热收缩氟弹性体软管　阻燃　耐流体　收缩比２：

Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-233:1998)

1998

QT-20

航空航天系列 碳氟橡胶制低压缩永久变形O形环 硬度80IRHD

Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD

1998

QT-21

航空航天系列 碳氟橡胶制低压缩永久变形O形环 技术规范

Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification

1998

QT-22

塑料　含氟聚合物分散体模塑和挤塑材料　第1部分：命名系统和基本规范

Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 12086-1:1995)

1999

QT-23

塑料　含氟聚合物分散体模塑和挤塑材料　第2部分：试样的制备和性能的测定

Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:1995)

1999

QT-24

航空航天系列　管连接　松套法兰和密封垫　碳氟橡胶垫和铝合金附件

Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy / Note: To be replaced by prEN 3869 (2003-05).

2003

QT-25

航空航天系列　硬度 80 IRHD 　氟硅橡胶 (FVMQ)Ｏ形环　

Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD / Note: To be replaced by prEN 3746 (2003-05).

2003

QT-26

航空航天系列　氟硅橡胶 (FVMQ)Ｏ形环　技术规范　

Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification / Note: To be replaced by prEN 3747 (2003-05).

2003

QT-27

航空航天系列　管连接、松套法兰和密封件　碳氟橡胶密封件和铝合金附件　技术规范

Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy; Technical specification / Note: To be replaced by prEN 4054 (2003-05).

2003

QT-28

绝缘软套管　第3部分：个别型号套管规范　活页343至345：无涂层膨胀辫形乙烯氯三氟乙烯(E-CTFE)纺织套管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated (IEC 60684-3-343 to 345:2002) / Note: Endorsement notice

2002

QT-29

聚氯三氟乙烯(PCTFE)塑料规范(08.01)

Specification for Polychlorotrifluoroethylene (PCTFE) Plastics (08.01)

1991

QT-30

改良ETFE含氟聚合物模塑和挤塑材料规范(08.03)

Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials (08.03)

1998

QT-31

E-CTFE-含氟聚合物模塑和挤塑材料规范(08.03)

Specification for E-CTFE-Fluoropolymer Molding and Extrusion Materials (08.03)

2000

QT-32

氟聚物微粒粉剂规范

Specification for Fluoropolymer Micro Powders (08.03)

1999

QT-33

含氟聚合物树脂热缩管件规范(10.02)

Specification for Fluoropolymer Resin Heat-shrinkable Tubing for Electrical Insulation

2000

QT-34

电绝缘用聚1,1-二氟乙烯热缩管件规范(10.02)

Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation

2000

QT-35

搬运、运输和储存聚四氟乙烯1301 溴三氟甲烷(CF3BR)惯例

Practice for Handling, Transportation, and Storage of Halon 1301 Bromotrifluoromethane (CF3BR)

2000

QT-36

全氟(烷氧基烷径)共聚物(PFA)塑料衬里黑色金属管及配件规范

Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) Plastic-Lined Ferrous Metal Pipe and Fittings

1996

QT-37

聚四氟乙烯1301、三氟甲溴(CF3Br)规范

Specification for Halon 1301, Bromotrifluoroemethane (CF3BR)

2001

QT-38

碳氟化合物Perfluoromethoxy (MFA)树脂模塑和压塑材料规范

Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials

1998

QT-39

含铜全氟化乙烯稳定性试验方法

Test Method for Stability of Perchloroethylene with Copper

1996

QT-40

PFA碳氟模塑和挤塑材料规范

PFA-Fluorocarbon Molding and Extrusion Materials, Specification for (08.03)

2001

QT-41

TFE碳氟树脂铸膜规范

Specification for TFE-Fluorocarbon Resin Cast Film (08.03)

2001

QT-42

碳氟化合物全氟甲氧基树脂(MFA)模制和挤压材料的标准规范

Standard Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials

1998

QT-43

电绝缘用含氟聚合物树脂热收缩管的标准规范

Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation

2000

QT-44

聚三氟氯乙烯挤压塑料薄板及薄膜标准规范

Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film

2002

QT-45

聚氯三氟乙烯(PCTFE)塑料的标准分类系统

Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics

2003

QT-46

全氟烷氧基(PFA)-含氟聚合物管的标准规范

Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing

2003

QT-47

含氟聚合物微粉的标准规范

Standard Specification for Fluoropolymer Micropowders

2004

QT-48

机械加工的聚氯三氟乙烯航空航天部件的标准规范

Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene

2005

QT-49

全氟烷氧基(PFA)-碳氟树脂模塑及挤压材料标准规范

Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials

2006

QT-50

改进的ETFE-含氟聚合物模塑和挤压材料标准规范

Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials

2006

QT-51

聚氯三氟乙烯(PCTFE)加工制零件和通用零件的标准规范

Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use

2006

QT-52

E-CTFE-氟塑料模压、挤压和涂覆材料的标准分类系统

Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials

2006

QT-53

飞机电缆和设备电线套管.第4部分:粘结和绝缘用碳氟化合物热收缩套管规范

Sleeves for aircraft electric cables and equipment wires - Specification for fluoropolymer heat shrinkable sleeving for binding and insulation

1996

QT-54

碳氟橡胶制低压缩永久变形O形环.硬度:80IRHD

O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD

1998

QT-55

绝缘软套管规范.各型套管要求规范.压制碳氟化合物套管.一般用途

Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Extruded fluorosilicone sleeving - General purpose

1998

QT-56

碳氟橡胶制低压缩永久变形O形环.技术规范

O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification

1998

QT-57

绝缘软套管规范.各种型号套管的规范要求.无涂层可扩张编织的乙烯-三氟氯乙烯(E-CTFE)纺织套管

Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated - Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated

2002

QT-58

航空航天系列.管连接件、松套法兰和密封件.碳氟化合物橡胶密封件和铝合金保护壳.技术规范

Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy - Technical specification

2004

QT-59

航空航天系列.管连接件、松套法兰和密封件.碳氟化合物橡胶密封件和铝合金保护壳

Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy

2004

QT-60

柔性绝缘软管.各种型号软管规范.热收缩氟弹性体软管、阻燃、耐流体、收缩比2:1

Flexible insulating sleeving - Specifications for individual types of sleeving - Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1

2006

QT-61

塑料.含氟聚合物分散体模塑和挤塑材料.试样的制备和性能的测定

Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Preparation of test specimens and determination of properties

2006

QT-62

塑料.含氟聚合物分散体模塑和挤塑材料.命名系统和基本规范

Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Designation system and basis for specifications

2006

QT-63

氟硅橡胶板、模和挤压的特性.规范

Properties of fluorosilicone rubber sheet, mouldings and extrusions - Specification

2006

QT-64

用符合BS F 154氟硅橡胶材料制成的弹性环形密封圈("O"形圈)的特性.规范

Properties of elastomeric toroidal sealing rings ("O" rings) manufactured from fluorosilicone rubber material released to BS F 154 - Specification

2006

QT-65

航空航天系列.氟硅酮橡胶(FVMQ)O型密封圈.硬度为80IRHD

Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD

2007

QT-66

航空航天系列.氟硅酮橡胶(FVMQ)O型密封圈.技术规范

Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification

2007

QT-67

航空航天系列.密封化合物.第2部分:偏二氟乙烯-六氟丙烯基.技术规范

Aerospace series - Sealing compounds - Part 2: Vinylidene fluoride and hexafluoropropylene base; technical specification

1998

QT-68

航空航天系列.低压缩变形的氟碳橡胶(FKM)O型环.技术规范

Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification; German version EN 3050:1998

1998

QT-69

航空航天系列.低压缩变形的氟碳橡胶(FKM)O型环.硬度80IRHD(国际橡胶硬度标度)

Aerospace series - O-rings, in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD; German version EN 3049:1998

1998

QT-70

电工用塑料薄膜的规范.第3部分:各种材料的规范.第7活页:电气绝缘用氟乙烯丙烯薄膜要求

Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation (IEC 60674-3-7:1992); German version EN 60674-3-7:1998

1999

QT-71

绝缘软管.第3部分:各型软管规范.343至345节:无涂层可扩张乙烯三氟氯乙烯纤维编织软管

Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated (IEC 60684-3-343 to 345:2002); German version EN 60684-3-343 to 345:2002

2003

QT-72

电缆和软导线用绝缘和铠装复合物.含氟的聚合物

Insulating and sheathing compounds for cables and flexible cords - Fluorinated polymers

2004

QT-73

从电气设备中取得六氟化硫(SF6)的检验和处理指南及其再使用规范

Guidelines for the checking and treatment of sulfur hexafluoride (SF<(Index)>6) taken from electrical equipment and specification for its re-use (IEC 60480:2004); German version EN 60480:2004

2005

QT-74

航空航天系列.氟硅酮橡胶(FVMQ)O型密封圈.技术规范

Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification; German and English version EN 3747:2003

2005

QT-75

航空航天系列.氟硅酮橡胶(FVMQ)O型密封圈.硬度为80IRHD

Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD; German and English version EN 3746:2003

2006

QT-76

塑料.含氟聚合物分散体模塑和挤压材料.第2部分:试样制备和性能测定

Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:2006); English version of DIN EN ISO 1 2086-2:2006-05

2006

QT-77

塑料.含氟聚合物分散体模塑和挤压材料.第1部分:命名系统和基本规范

Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 12086-1:2006); English version of DIN EN ISO 12086-1:2006-05

2006

QT-78

绝缘软管衬.第3部分:各类管衬的规范.第233页:阻燃的耐流体的收缩比为2:1的热收缩含氟弹性管套(IEC 60684-3-

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable, fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-233:2006); German version EN 60684-3-233:2006

2006

QT-79

航空航天系列.管连接件、活动法兰和密封件.氟烃橡胶密封件和铝合金附件.技术规范

Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy - Technical specification; German and English version EN 4054:2004

2006

QT-80

绝缘软套管.第3部分:各种类型套管的规范.第136活页:挤压氟硅酮套管.一般用途

Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose (IEC 60684-3-136:1997); German version EN 60684-3-136:1998

1999

QT-81

航空和航天系列.管道联接件、活动法兰和密封件.铝合金碳氟橡胶和电枢密封件

Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy; German and English version EN 3869:2004

2007

QT-82

绝缘软管 第3部分:各种型号软管规范 活页136:通用挤压氟硅软管

Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose

1997

QT-83

绝缘软管.第3部分:各种型号软管规范.第343至345篇:无涂层可扩张编织的乙烯三氟氯乙烯纤维软管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated

2002

QT-84

绝缘软管.第3部分:各种型号软管规范.活页136:通用挤压氟硅软管

Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose

1999

QT-85

绝缘软套管.第3部分:各种型号套管规范.活页233: 阻燃、耐流体、收缩比2:1的热收缩氟弹性套管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1

2006

QT-86

塑料.含氟聚合物分散体模塑和挤塑材料.第2部分:试样的制备和性能的测定

Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

2006

QT-87

塑料.含氟聚合物分散体模塑和挤塑材料.第1部分:命名系统和基本规范

Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications

2006

QT-88

塑料.含氟聚合物分散体模塑和挤塑材料.第2部分:试样制备和性能测定.技术勘误1

Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Technical Corrigendum 1

2006

QT-89

金属基片的氟塑料涂层膜

Fluoroplastic coating film on metal substrate

1996

QT-90

塑料制品.氟聚合物色散和制模及挤压材料.第1部分:标识系统和规范基础

Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 1: Designation system and basis for specifications

1996

QT-91

塑料.氟化聚合色散模塑和挤塑材料.第2部分:试样的制备和特性的测定

Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties

1999

QT-92

钢结构件用氟化树脂涂料

Fluoro resin paint for steel structures

2002

QT-93

建筑用氟化树脂涂料

Fluoro resin paint for architecture

2002