Fluororesin

PTFE Molding Powder Resin

　　PTFE Molding Powder Resin is designed for use in molding which is white granular PTFE resin, with excellent chemical stability,electrical property and low frictional coefficient.
　　Application:High performance rods,sheets and films,General-molding parts,Small parts,profiles.

Pelletized Free-flow PTFE Resin

　　Pelletized free-flow PTFE resin is a kind of white granular product. It has excellent fluidity, electricalproperties, extremely chemical inertness and outstanding mechanical properties like low frictional coefficient..
　　Application:It can be used for processing complicated articles. It also can be used for processing big sheetsby compression molding, equal compression molding, automatic compression molding and exact extrusion.Pelletized free-flow PTFE resin is propitious for automatic processing that can shorten processing period anddecrease compression molding processing cost.

PTFE Presintered Resin

　　It is a white powder presintered PTFE resin, with good flowability, low frictional coefficient, goodthermal stability and outstanding chemical inertness. Its melting point is 327℃.
　　Application:It is suitable for ram extrusion of pipes, rods and other PTFE products.

Fine Cut Granular Resin

　　PTFE fine cut granular molding resin is a kind of white granular product. It has excellent electricalproperties, extremely chemical inertness, and outstanding mechanical properties like low frictional coefficient.
　　Application:It is used for processing varieties plates and rods .Such as general molding parts,filled products,skived films and sheets,high-performance molding products.

PTFE Fine Powder Resin

　　PTFE Fine Powder Resin is white fine powder which are agglomerated particles of dispersion PTFE resin, withextraordinary characteristics, such as excellent thermal stability, extremely chemical inertness, especially good electrical properties and low frictional coefficient, etc.
　　Application:It can be blended with organic solvent and suitable for paste extrusion by a process called as paste extrusion. It is widely used to produce small rods, tubes, cable insulations and unsintered tapes at low tomedium reduction ratios.

PTFE Dispersion

　　It is milky or yellowishliquids and have a lot of superior properties such as good thermal stability, excellent chemical inertness,distinguished electrical insulating property and low friction coefficient. It can be processed by coating and impregnating.

PTFE Micropowder

　　Polytetrafluoroethylene (PTFE) micropowder is a white PTFE powder with very low molecular weight and very small particle size, and sometimes it is called as PTFE super-fine powder or PTFE wax. It is produced at the presence of a MW modeulator, and the liquid dispersion obtained is followed with coagulation, washing and drying. The product has excellent properties such as thermal resistance, weather resistance, lowtemperature resistance, low frictional coefficient, low adhesiveness, chemical inertness and electrical insulation etc.With very good dispersiveness attributed to its very small particle size, It is readily to be mixed homogeneously with other materials.
　　Application:PTFE micropowder can be solely used as a dry lubricant, and it is also widely used as additive for plastics, elastomers, coatings, inks, lubricant oils and greases etc.　　A variety of typical processes, for example, blending, are suitable for the product to be mixed with plastics and elastomers. Used as additive, the regular content of PTFE micropowder

Meltable PTFE Dispersion

　　It is an aqueous dispersion of copolymer of TFE and PPVE, stabilized with non-ionic surfactant. It is not only possesses almost all the excellent properties of PTFE as extreme chemical inertness, excellent thermal stability, extraordinary electrical insulation and low frictional coefficient, but also is a thermoplastic which can be easily fabricated. At the temperature above melting point, the melt has lower surface tension, higher fluidity and penetrating quality than those of PTFE. The coating has smooth surface, no pinhole. With the long term utilizing temperature range of ±250℃ and higher mechanical strength than those of PTFE, it can be widely used as non-sticky, anticorrosive or insulation coating in the way of impregnating, spraying, casting and spinning etc.
　　Application:It is suitable for ram extrusion of pipes, rods and other PTFE products.

Perfluorinated ethylene-propylene Copolymer

　　Perfluorinated ethylene-propylene (FEP) is the copolymer of tetrafluoroethylene(TFE) and hexafluoropropylene(HFP) with excellent thermo-stability and chemical inertness, outstanding electrical insulation and very low friction coefficient. There are three grades available, classified by melt flow rate (MFR).
　　Application:The thermoplastic process techniques can be used to fabricate useful products from FEP

Fluorinated Ethylene-propylene Copolymer For High-speed Extrusion

　　Fluorinated ethylene-propylene copolymer for high-speed extrusion is a novel copolymer of tetrafluoroethylene and hexafluoropropylene. It has all the excellent properties of FEP, such as wide using temperature range from -200℃ to 200℃, outstanding chemical inertness, good electrical insulation and extremely low friction coefficient. It can be processed like normal thermoplastic resin. The insulation wires extruded with Fluorinated ethylene-propylene copolymer have superior reliability and flame resistance.

Fluorinated Ethylene-propylene Dispersion

　　The aqueous dispersion of fluorinated ethlene proplene with milky or yellowesh color, stabilized by non-ionic surfactant.The products from dispersion have distinctive properties, such as outstanding thermal stability,excellent chemical inertness, low friction coefficient, superior corrosion resistance and electrical insulation, and can be used at temperature up to 200℃ continuously.
　　Application:It can be processed by spray coating and impregnating.

FEP Powder For Electrostatic Spray Coating

　　It has extraordinary properties, such as high apparent density, excellent fluidity, thermal stabilityand leveling property. It can be coated on the surface of a variety of metals the thickness of 0.11~ 0.15mm for each coating layer. The product also has good re-coating ability. It is always used as antistick and anticorrosive coating.
　　Application:It is suitable for electrostatic coating followed with sintering at high temperature. Before electrostatic coating, it is necessary to follow a substrate treatment process including deoilling, rust removing,sand blasting, inactivation, parkeriging, anodization and processing of primer coating and sintering. Repeatedly coating may be necessary to reach required thickness (usually below 0.5mm).

Fluorocarbon Nonsticky Coating

　　Fluorocarbon nonsticky coating is a kind of water soluble material, composed of PTFE(FEP or PFA) and other components such as adhesive agent, leveling agent, thickener, surfactant, pigment and packing materials.
　　Application:It can be used in machines of food, textile and other industries for antiadhesive purpose. It can be used to decrease frictional coefficient and increase the lubrication of the surface of cameras and bearings. It can continuously operate in a wide temperature range from -50℃to 250℃.